A blower door test uses a fan and pressure measurements to assess air leakage through a building enclosure under controlled test conditions. Its usefulness depends on a defined test method, building preparation, and interpretation by qualified personnel.
Know the question being tested
The test can help evaluate enclosure airtightness and support investigation of leakage paths. It does not by itself prove that the building has adequate ventilation, no water leaks, or acceptable insulation everywhere.
Ask the project team what criterion or diagnostic purpose applies and how the result will be reported. Comparing numbers without matching the test basis and building configuration can be misleading.
Choose the timing deliberately
Testing while important layers remain accessible can help the team find and address problems. A final test may serve a different verification purpose. Coordinate the sequence with the construction and commissioning plan.
For example, discovering leakage at a repeated wall-to-roof connection is more actionable before finishes conceal every instance. The team should know who investigates findings and how corrections are recorded.
Interpret the result in context
Document what openings were treated during preparation, which portions of the building were included, and any limitations. Follow the applicable testing and safety procedures rather than attempting an improvised pressure test.
DOE's energy-assessment guidance identifies blower-door testing as one diagnostic technique used to evaluate building performance. It should be considered alongside other inspections and system checks.
At handover, retain the report and significant corrective actions. The practical value is evidence about the enclosure and a clearer understanding of leakage—not a single number presented as a complete certificate of building quality.