Humidity control in a new building requires attention to water sources, the enclosure, ventilation, and equipment operation. A cooling system running does not by itself prove that moisture conditions are appropriate.
EPA's moisture guidance treats leaks, condensation, and indoor humidity as related building concerns. Start by identifying possible sources: construction moisture, plumbing, rain entry, occupant activities, and outdoor air introduced through the ventilation system or leaks.
Ask the mechanical and enclosure designers to explain the control strategy for the project's climate and use. Review part-load and seasonal conditions as well as peak cooling. Spaces may experience moisture problems when temperature demand is low but moisture sources remain.
Protect materials during construction and allow appropriate drying before enclosure. Record how wet work, temporary conditioning, and weather exposure will be managed. Concealing damp materials can create problems that are difficult to inspect later.
Coordinate drainage and maintenance access around equipment. Condensate systems, coils, filters, and controls need practical inspection routes. Clearly identify which readings or alarms require action and who is responsible.
At handover, verify system settings and any specified testing. Explain normal operation to the owner and avoid unsupported universal humidity targets without considering the building and climate.
If complaints arise, collect temperature and humidity information over time and inspect for water sources. The correction should address the cause rather than simply lowering a thermostat. Moisture control is a building-wide process that continues after construction is complete.