High-wind design requires a coordinated path for forces through the building and into the ground, together with appropriate protection of the enclosure and attached components. It cannot be reduced to one stronger roof product.
FEMA's coastal-construction guidance explains the concept of a continuous load path through structural connections. The project engineer must determine the applicable wind design conditions and develop the specific structural system and connections for the site.
Review the whole exterior. Roof coverings, cladding, openings, rooftop equipment, canopies, and site features may each need design attention. A strong main frame does not establish that every attached component is adequately secured.
Coordinate architectural and structural details before procurement. Connection locations, substrates, edge conditions, and installation instructions should be consistent across drawings and product information. Substitutions need review for the actual design conditions.
Plan inspection of concealed work. Connections and fasteners may be difficult to verify once finishes cover them. Agree the relevant hold points and documentation with the construction team.
Include operating and maintenance considerations. Owners should know which components need inspection and how damage or deterioration is reported. Movable outdoor items and equipment require an appropriate severe-weather plan.
Avoid promising that a building is windproof. Design is based on defined hazards, criteria, and performance objectives. A credible project explains those assumptions and provides evidence that the coordinated details were installed as intended, while retaining a practical plan for inspection and upkeep.