Air barriers control air movement through the building enclosure; vapor retarders limit water-vapor diffusion through materials. These are different functions, even when a particular product contributes to both.
Identify the intended layers
DOE's building science guidance distinguishes air control from vapor diffusion control. Ask the designer to show which materials perform each function in the proposed wall or roof and how those layers connect at edges and openings.
Do not assume that adding a low-permeance sheet anywhere in an assembly improves it. The appropriate vapor-control strategy depends on the climate, materials, interior conditions, and drying potential of the complete design.
Follow continuity at interfaces
An air-control layer needs coordinated transitions around windows, services, floors, and roofs. A product can have suitable properties while the assembled building still has gaps at these connections.
For example, a service penetration installed after the main wall work may interrupt a layer the service trade does not normally consider. The project scope should identify how that penetration is detailed and completed.
Make review practical
Ask for clear drawings, compatible products, installation instructions, and checks before concealment. Where testing is planned, define its purpose and timing so the team can investigate findings while access remains possible.
Keep product substitutions under design review. Changing one material can alter more than the visible finish, including how the assembly manages moisture.
Owners do not need to choose a vapor strategy themselves. They need an explanation of the designed assembly and confidence that the relevant layers remain continuous where trades meet. Treating every membrane as an interchangeable barrier obscures the different jobs the enclosure must perform.